Bäumle, R. , Menz, C. , Reich, M. , Koeniger, P. , Krekeler, T. (2019): First application of a newly developed field gas extraction device to date old groundwater.

In: International Symposium on Isotope Hydrology: Advancing the Understanding of Water Cycle Processes CN-271. Vienna

Zusammenfassung

Redox condition, in particular the amount of oxygen in groundwater used for drinking water supply, is a key factor for the drinking water quality as well as for the production well’s lifecycle. Thus, a process-based and quantitative understanding about the oxygen fluxes in groundwater systems is fundamental in order to predict e.g. the removal capacity of pollutants or in particular the likelihood of iron-related well clogging. Such well ageing is a major thread for well operators and objective in practice and science. The formation of iron oxides responsible for well clogging is mainly known for wells abstracting groundwater from unconsolidated aquifers with a distinct redox zonation. The accumulation of precipitates is primarily taking place at the slots of the well screens, but also affects aquifers, pumps and collector pipes. Several studies already identified interacting hydro-chemical and microbiological processes as major cause for the development of iron oxides in wells. They develop in the presence of dissolved species of iron and oxygen in the water. The co-occurrence of both, the dissolved iron and oxygen, is the result of a mixing of groundwater with different redox states. The abstraction of groundwater by wells is known to promote such mixing processes. Particularly, frequent water table oscillations with high amplitudes in contrast to natural conditions and managed aquifer recharge measures may deliver oxygen to groundwater. But the impact of different well management strategies on the sources and rates of oxygen delivery to aquifers was not studied in detail so far. Within the thesis presented here, oxygen fluxes to groundwater were qualified and quantified based on statistical, modelling, laboratory and field site studies and their impact on well performance was determined for different well operation schemes and different hydrogeological conditions. Processes were exemplarily investigated for the quaternary aquifers of Berlin, which are the exclusive source for the drinking water supply of the German capital. Analysis of design, operation, geological setting, hydrochemical composition and maintenance activities of Berlin’s drinking water wells illustrated the vulnerability of wells for clogging processes and revealed the relevance of detailed investigations on this topic. A general estimation of the two main oxygen delivering processes influencing groundwater aeration, air entrapment and bank filtration, was done by a generic transport model. Simulation of oxygen fluxes with regard to different hydrogeological and operational boundary conditions revealed air entrapment as major source. Oxygen delivery by bank filtration was subsidiary and strongly depending on flow gradients and permeability of the banks. Air entrapment due to oscillating water tables was quantified by aeration tests in column experiments under laboratory conditions. Results pointed at a downward shift of oxygen caused by repeated oscillations as a consequence of oxygen dissolution and advective transport of dissolved oxygen inside the column. A downward propagation of oxygen into the permanently water-saturated zone was not observed for switching intervals shorter than 24 hours. Such repeated short-termed oscillations led to an enrichment of oxygen, but with a constantly decreasing increment per oscillation. Oxygen degradation was not accounted for in simulation and inhibited in laboratory studies. But, in situ monitoring of oxygen at three selected well sites in Berlin provided a real insight into oxygen fluxes and their effects on well ageing processes under field conditions. The monitoring network included multi-level observation wells and vertical strings of oxygen sensors installed in the aquifer and inside the wells. Thus, it was feasible to measure changes in hydraulic conditions and redox dynamics. Oxygen distribution could be observed as a function of depth and recharge source in a high temporal and spatial resolution for the first time. It was possible to detect traces of oxygen in the well-near aquifer and inside the wells, which are sufficient to oxidize high loads of dissolved iron when supplied constantly. All three well sites showed oxygen distribution patterns, which significantly differed from the others. These variations referred not only to the initial distribution, sampled at idle equilibrium, but also to the progression of oxygen saturation during abstraction and recovery phases. Enrichment and downward propagation of oxygen as result of abstracting water could be observed at all well sites, although absolute concentrations varied strongly between the well sites. By this, it was possible to correlate oxygen variations to hydrogeological boundary conditions. Infiltrating oxic surface water via river, lake or artificial pond banks delivers high amounts of oxygen to the groundwater and can cause an enormous widening of the oxic zone towards the abstracting well. As a result, the oxic/anoxic interface moves downward close to the well once water is abstracted. But, clogging of wells abstracting bank filtrate or artificial recharge strongly depends on the residence times of the filtrate, the hydraulic connection between banks and groundwater and seasonal variations. Only under certain conditions a significant enhancement of clogging can be expected. To directly link well operation, oxygen delivery and ochre formation with well performance development, a well model scaled up to realistic proportions was designed, built and operated with natural groundwater. The tank experiment enabled to study distribution patterns of ochre formation with regard to the different structural zones of the well, including aquifer, filter pack and screen slots and its influence on pressure losses and well performance. It could be shown, that groundwater was enriched with oxygen during the tank passage by oscillating water tables and that permeability and specific well yield generally decreased over time. The distribution of ochre deposits in the well tank showed a distinct mineral zonation with high deposition rates of manganese and iron in the filter pack at the top of the well screen. Further, interfaces of aquifer and/or filter pack were strongly affected by iron deposits. Thus, preventing ochre formation is an appropriate measure. The preventive treatment of wells with hydrogen peroxide could be such a measure, but could also be a potential source for oxygen in well and filter pack. By reviewing the latest research activities and operator’s data and by investigating at laboratory and field site scale, the current treatment procedure was evaluated. Investigations revealed a clear improvement potential for the treatment with hydrogen peroxide. Impacts of the treatment were however low, especially if incrustations were already established. Results of column batch studies and field tests did not fully prove the effectiveness of the preventive treatment, but indicated that with higher concentrated solutions and an improved treatment procedure ochre formation can be retarded and rehabilitation potential can be improved. Another approach to prevent ochre formation is the classification of well sites considering their ageing vulnerability and the development of adapted operation schedules. At least such a measure can support a sustainable construction, operation and maintenance of wells. A statistical approach was used to quantify well ageing and to identify factors promoting well performance loss. Most appropriate clogging indicators could be identified and were used to analyse worst and best site conditions with regard to their impact on ochre formation. Accordingly, a well in high distance to the next surface water with a thick groundwater layer above the well screen situated in a confined aquifer with high redox potential gains the lowest ageing potential. Compared to worst site conditions and calculated for the mean life time of a typical Berlin drinking water well, this can account for a difference in well capacity of up to 90%. In addition to that, optimized rehabilitation intervals for the identified well classes based on their ageing potential could be exemplarily determined. Based on the results of this thesis, strategies for an optimized monitoring of well ageing processes and strategies for an adapted well management aiming at the reduction of ochre formation can be developed.

Weidner, C. , Houben, G. , Halisch, M. , Kaufhold, S. , Sander, J. , Reich, M. , Menz, C. (2016): Wellbore Skin in Mine Dewatering and Drinking Water Supply: Field Observation, Mineralogy and Hydraulic Effect.

p 8 In: IMWA 2016 Mining meeets Water - Conflicts and Solutions. Leipzig, Germany. 11-15 July 2016

Zusammenfassung

When it comes to well loss and efficiency, the occurrence of wellbore skin layers is one of the strongest influencing factors. Besides difficulties to remove the skin layer that is necessary during the drilling process, it is also not easily possible to determine if a skin layer is present in a well and whether or not it imposes a certain degree of well loss. With this work, three types of skin layers are presented (surface cake, deep-bed filtration, layered cake in the aquifer), that have been observed at dewatering wells excavated in open-pits of the Rhenish lignite mining district in western Germany. Disturbed and undisturbed samples were analyzed for their geochemical and mineralogical composition in order to better understand the formation of the skin layer types and their fate during well operation. Geochemical analysis revealed the skin layer to be mainly composed of quartz (˜ 40 wt-%), kaolinite/illite (˜ 30 wt-%), organic material (5-15 %) and secondary gypsum precipitates (up to 12.5 wt-%). Despite the high quartz contents, the granulometry yields high fractions of clay and silt (75-85 %). However, preferential flow paths, transecting the skin layer are created by micro-cracks and erosion-pathways which will cause a higher hydraulic conductivity than could be expected from the granulometry.

Reich, M. , Menz, C. (2015): Technische Entwicklung in der Tagebauentwässerung - ein Überblick.

bbr Fachmagazin für Brunnen- und Leitungsbau 66 (11): 38-46

Zusammenfassung

Für die Gewinnung von Braunkohle ist die Absenkung des Grundwasserspiegels im Rheinischen Braunkohlerevier notwendig. Die große Ausdehnung der Tagebaue, sowohl in der Fläche als auch in der Tiefe, erfordert dabei eine über mehrere Jahrzehnte anhaltende Entwässerung der Lockergesteinsschichten. Hierfür werden Sümpfungsbrunnen verwendet, die bis in eine Tiefe von 750 m reichen. Im gesamten Rheinischen Braunkohlerevier werden von der RWE Power AG ca. 1.500 solcher Brunnen zur Entwässerung der Tagebaue eingesetzt.

Zusammenfassung

Im Fokus des Projektes "Mikrobielle Verockerung in technischen Systemen" standen neutrophile und acidophile Eisenbakterien, die in Leitungen, Brunnen und an und in Pumpen vorkommen und dort Ablagerungen unlöslicher Eisenverbindungen verursachen. In Brunnen, werden diese Ablagerungsprozesse, die den Zustrom behindern und damit die Brunnenleistung mindern, auch als Brunnenalterung bezeichnet. Nach derzeitigem Stand des Wissens weisen in Deutschland dabei rund 80% der gealterten Brunnen biochemisch induzierte Eisenablagerungen auf (Houben & Treskatis 2002). Die Wiederherstellung der Brunnenleistung im Rahmen von Regenerierungen und präventiven Instandhaltungsmaßnahmen ist ressourcen- und energieintensiv, so dass ein besseres Verständnis der Schlüsselparameter und Lebensbedingungen der Eisenbakterien hilft, den Brunnenbetrieb und die Instandhaltungsmaßnahmen zu optimieren und die Brunnenalterung zu reduzieren. Das Kompetenzzentrum Wasser Berlin (KWB) war einer von insgesamt 14 Verbundprojektpartnern in dem interdisziplinären Team aus Wissenschaftlern, Ingenieuren und Technikern. In Teilprojekt 5 standen Probenahmen von Berliner Betriebsbrunnen und das Datenmanagement des Gesamtprojektes im Mittelpunkt der Arbeiten. Inhaltlich knüpften die Felduntersuchungen an das von den Berliner Wasserbetrieben (BWB) initiierte und am KWB koordinierte Forschungsprojekt WELLMA (für 'well management') an. Wesentliche Aufgabe des KWB war der frühzeitige Transfer der bei den Forschungspartnern erarbeiteten Ergebnisse in die Betriebspraxis bei den Berliner Wasserbetrieben (Teilprojekt 6). Dazu wurden Brunnen und Unterwassermotorpumpen aus der Trinkwassergewinnung der BWB durch die Projektpartner der TU Berlin (Teilprojekte 1a und 1b) hinsichtlich des Vorhandenseins und der Zusammensetzung biochemisch induzierter Eisenablagerungen untersucht. Neben Belagsproben von Pumpen bei Instandhaltungsarbeiten wurden dabei auch tiefenorientierte, zielgerichtete Proben aus dem Innenrohr (Vollrohr und Filterrohr) von Brunnen sowie Ablagerungsproben aus Steig- und Rohwassersammelleitungen entnommen und mikrobiologisch und chemisch untersucht. Eigene Feldarbeiten des KWB umfassten daneben in-situ-Messungen des Redoxpotentials im nahen Umfeld eines Brunnens sowie in-situ-Messungen der Feststofffracht (Trübung) in Abhängigkeit betrieblicher Randbedingungen. Wesentliche Ziele waren die Identifizierung von Schlüsselparametern zum Verständnis der Prozesse der Eisenverockerung und -rücklösung und die Quantifizierung des sich daraus ergebenden Verbesserungspotentials im Betrieb und der Instandhaltung aus dem Bezug der Untersuchungen auf die wasserchemischen, baulichen und betrieblichen Eigenschaften der untersuchten Brunnen. Im Ergebnis wurden von März 2012 bis September 2013 Pumpen aus 26 von geplanten 30 Brunnen beprobt. Zu deren Auswertung wurden drei Cluster unterschieden: (i) Brunnen, bei denen die Pumpen stark eisenverockert waren (ii) Brunnen ohne sichtbare Eisenverockerung, aber mit Biofilmen und (iii) Brunnen mit sauberen Pumpen. Der Abgleich mit im Rahmen von Instandhaltungsarbeiten erfolgten Kamerabefahrungen bestätigte einen Zusammenhang zwischen der Stärke der Verockerung der Pumpe und dem Vorhandensein und der Stärke von Ablagerungen im Filterrohrbereich.Schlüsselparameter aus statistisch belastbaren Zusammenhängen zwischen den Eisenbakterien-Gemeinschaften, den chemisch-mineralogischen Ockereigenschaften und den wasserchemischen, baulichen und betrieblichen Parametern konnten jedoch nicht herausgearbeitet werden, da die Diversität der beteiligten Eisenbakterien höher als vermutet war und sich selbst direkt benachbarte Brunnen mit ähnlichen Eigenschaften hinsichtlich der Ocker stark unterschieden. Auch stellten die Probenahmen immer nur Momentaufnahmen der zeitlich hochvariablen Anströmbedingungen dar.

Möchten Sie die „{filename}“ {filesize} herunterladen?

Um unsere Webseite für Sie optimal zu gestalten und fortlaufend verbessern zu können, verwenden wir Cookies. Durch die weitere Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. Weitere Informationen zu Cookies erhalten Sie in unserer Datenschutzerklärung.