Zusammenfassung

This report compiles the results of three consecutive work packages that have been worked on during the Aquisafe II project. The approach developed is based on the previous Aquisafe I project where the Soil Water Assessment Tool (SWAT) was used as an analytical instrument to develop mitigation strategies for N loads and concentrations in the Ic catchment. During Aquisage I we concluded that SWAT should include a wetland function with which the effect of artificially, constructed wetlands on solute N fluxes can be evaluated. Chapter 1 compiles results of an extensive literature review that was made to identify potential wetland routines and processes that can be included in SWAT. The SWAT add-on to be developed should allow to individually test the effect on single wetlands (e.g. in a given hydrological response unit or subcatchment) as well as the effect of multiple wetlands on the landscape scale. We therefore implemented a stand alone version of the new wetland module which is described in Chapter 2. Here we show the general functionality and individual components of the wetland module. The chapter ends with a virtual application of the modules using SWAT outputs copied from the Ic results. Additionally, a Monte Carlo based sensitivity analyses of the wetland module input parameters showed that the denitrification rate seems to be the most constrained parameter for the simulation of N turnover in the new wetland module. A full implementation of the new wetland module is described in chapter 3. Here, the structural embedment of the wetland module in the SWAT architecture is described. To proof the functionality of the SWAT wetland module model runs were compared to the stand alone version to make sure that the module was correctly implemented. We conclude that the SWAT wetland extension is ready to be tested in real world catchments. Such a full test of the SWAT wetland model was planned towards the end of Aquisafe II. However, as data from the wetlands constructed within Aquisafe II were not available in due time, this last test of the SWAT module was possible.

Zusammenfassung

The Aquisafe project aims at mitigation of diffuse pollution from agricultural sources to protect surface water resources. The first project phase (2007-2009) focused on the review of available information and preliminary tests regarding (i) most relevant contaminants, (ii) system-analytical tools to assess sources and pathways of diffuse agricultural pollution, (iii) the potential of mitigation zones, such as wetlands or riparian buffers, to reduce diffuse agricultural pollution of surface waters and (iv) experimental setups to simulate mitigation zones under controlled conditions.

Zusammenfassung

The Soil and Water Assessment Tool (SWAT) has been applied to the Ic watershed, Brittany, France, to evaluate scenarios for reduction of nitrate in stream water. For the simulated period the model showed fair results with a mean index of agreement of 0.64 at the watershed outlet for discharge and nitrate loads. The management goal for the watershed is the meeting of drinking water threshold at the watershed outlet. An analysis of observed data revealed that nitrate loads would have to be reduced by at least 17% on average to reach that goal. Scenarios investigated cover fertilizer reduction and the introduction of wetland buffer zones. Decreased nitrogen inputs were realized on a) selected subbasins and b) all agricultural fields; wetlands were placed at three model subbasins. Most effective measures were a 50% fertilizer decrease on selected subbasins resulting in a range of 13 22 % reduction of nitrate loads with a high uncertainty. Consequently, none of the tested measures is likely to achieve a sufficient reduction. Combined measures such as enhanced fertilizer management and concurrent introduction of wetlands seem to be the most promising way to approach the drinking water threshold.

Möchten Sie die „{filename}“ {filesize} herunterladen?

Um unsere Webseite für Sie optimal zu gestalten und fortlaufend verbessern zu können, verwenden wir Cookies. Durch die weitere Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. Weitere Informationen zu Cookies erhalten Sie in unserer Datenschutzerklärung.